New Sahinler Angle Bending Roll

    Model PK-35

    Capacities:

           Pipe.....: 2" Schedule 40 (SP)

           Tubing...: 2-3/4" x .080" Round (SP)

                    : 2-3/8" x .125" Square

                    : 2" x 1-1/2" x .125" Rectangle

           Flat Bar.: 5" x 5/8" Easy Way

                    : 2-3/8" x 3/8" Hard Way

           Solid Bar: 1-3/8" Square and Round (SP)

           Angle....: 2" x 2" x 1/4" Leg Out

                      2" x 2" X 3/16" Leg In (SP)

           Channel..: 2-3/8" x 1-3/16" x 1/4"

  Note: Shapes above marked (SP) require optional special rolls. The other

    shapes can normally be rolled with standard rolls supplied with machine.

    Rolling leg in requires optional leg-in guide rolls and may require special

    rolls.

    Specifications: 
             Diameter of Shaft       : 1.96"

           Rolling Speeds          : 7.5 and 15 fpm

           Electrics               : 2 HP, 220 Volt, 3 Phase

           Weight                  : 800 lbs.

    Features:

           Steel Frame

           Two rolls driven

           Two Rolling Speeds

           Manually adjusted vertical roll

           Hardened and Ground Shafts and gears

           Shafts rotate on opposed tapered roller bearings

           Lateral straightening rolls

           Linear Scale to indicate position of vertical roll

           Horizontal and Vertical Operation

           Full Cabinet Base with Door

           Movable Foot Control

Note- Machine is also available in Single Phase Operation - which will provide Variable Speed - $350 Additional

    
FOB: Maryland