NEW SHARP 2040NC PRECISION CNC LATHE
(Also Available In 60" & 80" Centers
- Flat bed CNC Teaching Lathe with FAGOR 8055iA control and drive system
- User friendly conversational programming language
- Different modes of operations available
- Operate as manual lathe with electronic handwheels
- Operate as a full CNC lathe with programmable speed,
- using conversational language or G code language
- Operate semi automatically, combining manual and CNC operations
- Teach mode
- OEM 2-axis CNC, 12.1” TFT CNC Chassis & Floppy driver. Std 20 inputs/12 outputs
- D1-8 camlock spindle, 3-3/8” spindle bore
- Geared head with 3 steps speed change, programmable speed
- One Piece Cast Meehanite Bed
- 10 HP Spindle Motor (For 22” TC Model)
CNC CONTROL 8055i/A by Fagor:
OPERATING MODES:
- Manual – the lathe is operated like a conversational lathe, using the 2 electronic handwheels in the front to move the axes. In addition if offers convenient features such as digital readout and constant surface speed.
- Semiautomatic – it allows 2 axes to be controlled with the cranking of 1 handwhel, the machinist can cut arcs, tapers and chamfers.
- Automatic – with ability to execute any program, plus background editing capability. Powerful tool inspection mode included as well as full program control from keyboard programs to choose from, the 8085i/A will control everything from start to finish.
- Single step – the machinist can go through all or part of the process by executing the program step by step.
PROGRAMMING LANGUAGE:
- Conversational – icon key with conversational graphic screens for easy operator data input. No prior programming experience needed
- G-code – this programming enables utilization of some sophisticated features such as parametric or variable programming. Auto –prompt via the help key prompts operator though graphic & text help screens.
PROGRAMMING TOOLS:
- Teach-in mode – the first part can be made manually while the control records the corresponding program, and then additional parts can be made in automatic mode.
- Canned Cycles – by selecting the associated ICON key or G-code, the CNC will prompt you through all canned cycles including Turning, Facing, Grooving and Threading, All equipped with a Thread Repair Canned Cycle.
- On-board profile editor for easy blue print programming. Simply enter the data right off the blueprint, the CNC automatically creates the program including complex profiles..
- Solid graphic as standard with tool shape representation standard and available for use in both Execution and Simulation mode, Also with line graphic capability.
Swing Over Bed |
20” |
Swing Over Cross Slide |
12-1/4” |
Height of Center |
11” |
Distance Between Center |
80” |
Maximum Turning Length |
75.30” |
Width of Bed Ways (Construction) |
13” (2 V-Way and 2-Flat Way, Ellipse Rib) |
Total Length Bed |
118” |
Swing Over Gap |
30-3/4” |
Length of Gap |
11-3/4” |
Width in Front of Face Plate |
6-3/4” |
Spindle Nose Type |
D1-8 Camlock |
Spindle Bore |
3-3/8” |
Bar Capacity |
3 -1/4” |
Taper of Spindle Bore w/Center Sleeve |
MT# 5 |
Spindle Speeds (3 steps) |
1500-180, 300-30, 60-10 rpm |
Bearing And Size |
3 Points Supported |
Cross Slide Travel /Feed (X axis) |
11” |
Ballscrew Diameter (X axis) |
Dia. 1” x Pitch .2” C5 |
Cross Slide Rapid Travel (X axis) |
236 ipm |
Axis Motor (X axis) |
Yasakawa 220V 0.9Kw 7.3Nm AC Servo |
Longitudinal Travel /Feed (Z axis) |
76-3/8” |
Ballscrew Diameter (Z axis) |
Dia. 1.6” x Pitch .4” C5 |
Longitudinal Rapid Travel (Z axis) |
315 ipm |
Axis Motor (Z axis) |
Yasakawa 220V 1.3Kw ; 7.3Nm AC Servo |
Drive motor (X & Z axis) |
Yasakawa |
Maximum Size Cutting Tool |
1” x 1” For Square Tool; |
Hydraulic Turret (Optional) |
8 Tool Section; Index time: including locking |
Electrical Power Turret (Optional) |
6 Tool Section; Index Time: 0.4 sec. |
Electrical 4-way Power Turret (Optional) |
4 Tool Section; Index Time: 1.0 sec. |
Width of Cross-slide Cover |
7-1/4” |
Quill Diameter |
3” |
Quill Taper |
MT# 5 |
Quill Travel |
6-5/16” |
Pump Motor |
220V/12W/1Phase |
Discharge Volume |
.034 gal/min |
Discharge Pressure |
114 PSI |
Tank Capacity |
.53 gal |
Pump Motor |
1.8 HP 0.1kw |
Capacity & Pressure |
6.6 gal /min |
Tank Capacity |
37 gal |
Main Spindle Motor |
10 HP 3-Phase Continuous Rating Induction |
Invertor |
Yakasawa 220V 10HP |
Fagor |
Fagor 8055iA Mode, 11” Full-Key LCD, |
Dimensions (LxWxH) |
148”x60”x75” |
Net Weight (approx.) |
6160 lbs |
220V |
15KVA/50 amps |
440V |
15KVA/25 amps |
|
No files or videos to display