NEW SHARP SVX-300 5-AXIS CNC VERTICAL MACHINING CENTER

Brand

SHARP

Category

Machining Centers

Type

Machining Centers, Vertical

Model

Not specified

Stock #

14656

Year

Not specified

Condition

New

Location

Not specified

Specifications
Files & Videos

NEW SHARP SVX-300 5-AXIS CNC VERTICAL MACHINING CENTER

30" x 23.6" x 19.7" travel (X,Y,Z)
11.8" Trunnion table with A and C axis travel.
12,000 rpm, CAT 40, 15 HP
Fanuc 31i-B5 control, also available Heindenhain or Siemens control.

SHARP SVX-300

SPECIFICATIONS	UNIT
Control
Fanuc		31i-B5
Screen Size		10.4"
*Siemens, Heidenhain control are also available
Travel
X axis travel	inch (mm)	30" (760)
Y axis travel	inch (mm)	23.6" (600)
Z axis travel	inch (mm)	19.7" (500)
A axis travel	Degree	-120 ~ 30°
C axis travel	Degree	360°
Spindle nose to table (A=0°)	inch (mm)	3.9"-23.6" (100-600)

Table
Table area	inch (mm)	11.8" (300)
Max workpiece wt.	lb (kg)	330 (150)
T-Slot (Width x Degree)		0.7"x 45° (18 x 45°)
Spindle
Speed	rpm	12,000
Taper		CAT40
Bearing		Ceramic bearing
Type		Direct Drive
Spindle oil chiller		Oil Type
Feed Rate
Rapid traverse X/Y Axis	ipm (mm/min)	1,417 (36,000)
Rapid traverse Z Axis	ipm (mm/min)	1,417 (36,000)
Cutting feed rate	ipm (mm/min)	0.04-393 (1-10,000)
Transmission		Direct Drive
Motor
Spindle motor	Hp (Kw)	10/55 (7.5/11)

Automatic Tool Changer
ATC capacity		24
Method of tool selection		Set tool number
ATC type		Arm type, CAT40
Max tool diameter	inch (mm)	2.9" (75)
Max. tool length	inch (mm)	11.8" (300)
Max. Tool weight	lb (kg)	15.4 (7)
Without adjacent tool	inch (mm)	5.9" (150)
Air blast at tool change		OK
Accuracy
X, Y, Z axis: Position	inch (mm)	+/-0.0002" (0.0015")
X, Y, Z axis:Repeatability	inch (mm)	+/-0.00012" (0.0015")
A axis: Position	arc seconds	+-15
A axis: Repeatability	arc seconds	+-6
C axis: Position	arc seconds	+-15
C axis: Repeatability	arc seconds	+-6
Machine measurements
Floor space	inch (mm)	W: 91.3"(2320) x D:119" (3,000)
Height	inch (mm)	124.1" (2,960)
Weight	lb (kg)	28,050 (12,750)
Door opening	inch (mm)	43.3" (1,10)
Coolant system
Flood coolant nozzles		6
Coolant tank capacity	gal (L)	53 (240)
Chip Conveyor		Hinge type
Air blower nozzle (for cutting dry)		1
Power requirement
Electrical	220V/60 Hz	3 Phase/45 KVA
Air		6 CFM @ 88psi