NEW 18" x 60" SHARP MODEL 1860LV PRECISION ENGINE LATHE

Name: New SHARP 1860LV For Sale 14584
Brand: SHARP
SKU: 14584

Brand

SHARP

Location

Not specified

REQUEST FINANCING

Specifications
Files & Videos

NEW 18" x 60" SHARP MODEL 1860LV PRECISION ENGINE LATHE

The spindle is mounted on 2 precision tapered roller bearings and one ball bearing. This triple bearing support system ensure accuracy and rigidity at all times.

The headstock can be adjusted for heavy irregular work piece at high speed turning to ensure vibration free operations.

Handles that are used for engaging gears are built with locking pins to prevent the handles from being knocked out of place accidentally or under heavy cutting circumstances. Repositioning of handles is done by pulling the spring-loaded handle back and then shifting.

The universal gearbox design allows easy selection of inch and metric threading by just turning the lever to the assigned position instead of changing individual gears outside the headstock.

Selection of gears at the gearbox is done by a rotational style lever that results in less movement of the gears compare with the back-and-forth shifting style lever. Less movement of the gears means less wear and greater accuracy.

For maximum stability and minimum distortion, the entire base of the machine is made out of one-piece casting. The casting is made from high quality Meehanite process to ensure high tensile strength with excellent vibration dampening features.

The gapped bed design allows extra large work piece to be chucked at the spindle when the gap is taken out.

Bedways are induction hardened and ground for durability.

Headstock gears are hardened and ground, made out of Chrom-Moly alloy steel for maximum wear.

The headstock is equipped with a job button that allows inching movement of the spindle for easy engagement of gears.

One shot lube system is installed in the apron to direct lube oil to all the sliding surfaces.

wing over bed 18"

Swing over cross slide 10.2"

Swing over gap, width 26 1/2", 10 3/4"

Distance between centers 60"

HEADSTOCK

Spindle nose type D1-8 camlock

Spindle bore 3.125"

Spindle speeds (rpm) 20-2,000 (12)/vari

Taper of spindle bore MT #6

Taper of center MT #4

THREADS AND FEEDS

Longitudinal feeds-ipr (18) 0.002- .032"

Cross feed-ipr (12) 0.001-.0094"

Inch threads (36) 4-56 tpi

Metric& Module threads (17) 0.5-7mm

D.P. threads [36] 4-56mm

Leadscrew pitch, diameter 4 tpi, 1 3/8"

CARRIAGE

Crosslide travel 9 7/8"

Compound rest travel 5.3"

Compound width 5.0"

BED

Bed length 79"

Bed width 11 3/4"

TAILSTOCK

Quill travel (graduated) 5 1/2"

Quill diameter 2 11/16"

Quill taper MT #4

GENERAL

Spindle motor 7 1/2 hp

Net weight (approx.) 4,500 lbs