NEW 20" x 47" SHARP MODEL SH-2047 AUTOMATIC TRAVELING COLUMN SURFACE GRINDER
Table travel |
20.9" x 53.2" |
Spindle to table surface |
27.6" |
Table working surface |
19.7" x 47" |
Longitudinal table feed (fpm) |
6.6-82 |
Intermittent cross feed (ipm) |
0.04-0.6 |
Continuous cross feed (ipm) |
39 |
Number of graduations |
200 |
Feed per graduation |
0.001" |
Feed per revolution |
0.200" |
Vertical travel |
|
Number of graduations |
100 |
Feed per graduation |
0.0001" |
Feed per revolution |
0.010" |
Rapid down feed (in./min) |
11.8 |
Wheel size (OD x Width x ID) |
14"x2"x5" |
Spindle motor |
10 HP |
Approximate weight (lbs) |
16,000 |
Standard Accessories
- Grinding wheel (14”x 2”x5”)
- Electronic cross feed stroke setting
- Rapid wheel head up and down
- Wheel adapter/flange
- Auto lube system
- Coolant system (25 gal))
- Work light
- Balance stand and arbor
- Diamond dresser
- Tool kit
Optional Accessories
- Programmable wheel head down feed system with CRT
- Electro magnetic chuck
- Low profile electro magnetic chuck
- Parallel dresser (manual)
- Parallel dresser (semi-automatic)
- Radius and angle dresser
- Coolant system (30 gal.) with paper filter and magnetic separator
- Digital Readout Systems
THE PROGRAMMABLE SPINDLE DOWNFEED SYSTEM (optional)
The system is built specifically for the surface grinder to take over the control of spindle wheel downfeed movement. The numerical control system allows the operator to synchronize spindle vertical feed with longitudinal and cross feed of table for various grinding modes, such as plunge grinding or slot grinding.
|
No files or videos to display