Complete plant Featuring the following Equipment:
-60” x .104” x 60,000lbs Pro –Eco Cut to length line
5-HI high leveler
Cut lengths up to 16 feet
Gauge range of .008 - .125
-60” x .250” x 40,000lbs Paxson slitter
Dual Driven head loop pit slitter drive
Thickness range from .008 to .250”
Coil capacity to 40,000pounds
All shim less tooling
Slit widths from .750 to 60.00 inches
-36” Paxson Slitter
Driven head loop pit slitter drive
39” wide coil capacity
Gauge range .006 to .055
Coil weights to 30,000 pounds
All shim less tooling slit widths .750 to 39.00 inches
Slit widths available down to .500 inches.
Cranes form 15 ton to 100 ton
Forklifts from 4,000 pound to 30,000 pound capacity
165,000 square feet
Air rotation units and ceiling fans to keep the air moving at all times
Two loading docks
Drive thru doorway
Seven overhead cranes ranging in capacity from 15 ton to 100 ton!
35’ Clearance Under the Hook
The total area of the building is 170,000 square feet (Currently 15,000 square feet in under lease until May of 2023) leaving 155,000 square feet available immediately.
The building has driveways that run through the building at both the east and west ends. There is a back in doorway located in the center of the north side of the building.
There are 2 loading docks.
Norfolk & Southern has a rail siding under crane at the west end of the building. There is also an out- door loading ramp for loading and unloading boxcars.
The building has 7 overhead cranes. 2- 100 ton with 20 ton auxiliary hoists, 3- 25 ton with 5 ton auxiliary hoists and 2- 15 ton.
Power is 480V, 3,200 amps. Additional power is available if needed
There are three office areas totaling 7,500 square feet. There is space that can be developed for additional office space if needed.
There is an outer building of 4,000 square feet.