7/16 Mid Month Open CNC & Fab Auction

Doosan DNM 4500 Vertical Machining Center (2019) X axis travel 800 mm (31.49") Y axis travel 450 mm (17.71") Z axis travel 510 mm (20.1") Table loading area 1,000 mm x 450 mm (39.37" x 17.72") Allowable table load 600 kg (1,320 lbs) Table T-slot spacing x width (3) - 125mm x 18H8 (3) - (4.92" x .71") SPINDLE: Spindle nose to table top 150 mm to 660 mm (5.9" to 26") Big Plus Spindle system CAT 40 Big Plus Spindle speed 8,000 rpm AC Spindle Motor (S3 25%) 11 / 15 kW (15 / 20 hp) Spindle Torque (S3 15%) 286 nm (211 ft-lbs) Spindle Acceleration \ Deceleration time 0 - 8k (3.53 sec) \ 8k - 0 (2.52 sec) Equipped With 30 ATC Thru Spindle Coolant - 230 PSI 8K high torque spindle Renishaw probe Tool setter LNS MH250 filtration conveyor mistaway mist collector Machine Located in WA & available for bid with NO Reserve https://auctions.machinetoolbids.com/Event/LotDetails/3946192/Doosan-DNM-4500-Vertical-Machining-Center-2017

Mazak VCN 410A VMC (2006) X axis travel: 22″ Y axis travel: 16.1″ Z axis travel: 20″ Rapid Rate X Axis: 1,181 IPM Rapid Rate Y Axis: 945 IPM Rapid Rate Z Axis: 945 IPM Power: 25HP 12,000 RPM ATC: 30 Taper: Cat 40 Table (WxL): 16.1″ x 35.4″ Equipped With 1200 HOURS (RUN TIME) FUSION CONTROL CHIP CONVEYOR FIXTURE AND TOOL HOLDERS AVAILABLE 4TH AXIS Dims: 78.74" x 102.36" x 110.24" Weight: 10,580 LBS Machine located in California and available for bid with no reserve https://auctions.machinetoolbids.com/Event/LotDetails/3924651/Mazak-VCN-410A-VMC-2006

RDI Coil Straightener (2019) RDI Coil Straightener capacity: .078 thick x 72" wide manufactured in 2019 Technical Specifications: Roll Diameter: Straightener- 2.2 inches (56 mm) with polyurethane covering (80-85 durometer) Feed In/Out - 3.78 inches (96 mm) with hard chrome surface Roll Quantity: Feed Rolls - 4 (1 roll set entry and 1 exit) Straighteners: 11 (5 over 6 configuration with backup rolls) Roll Adjustments: Top Rolls adjustable via motorized adjustment with hinged roll opening mechanism for easy cleaning Roll Drive: Rolls driven by an AC motor and gear reducer transmitting power to each roll via chain and sprocket Roll Type: 52100 steel hardened Roll Backups: Top and Bottom Side Guides: Automatic, centerline justified Lubrication: Automatic lubrication Pneumatic: Pneumatic valves mounted to machine base and factory wired to a machine mounted junction box Hydraulic: Hydraulic valves mounted to machine base and factory wired to a machine mounted junction box Equipped With Outfeed pinch roll shaft needs to be replaced, but everything else is in great condition was only in service for 1.5 years Machine Located in North Dakota and available for bid with no reserve https://auctions.machinetoolbids.com/Event/LotDetails/3924134/RDI-Coil-Straightener-2019

Daewoo Lynx 200B CNC Lathe Max Turning Diameter: 11.0″ Max Turning Length: 11.8″ Max Bar Capacity: 1.75″ Swing Over Bed: 18.0″ Distance Between Centers: 20.0” X Axis Travel: 6.3″ Z Axis Travel: 13.0″ Rapid Traverse X Axis: 787 IPM Rapid Traverse Z Axis: 945 IPM Spindle Nose: A2-5 Spindle Bore: 2.0″ Spindle Speed: 35 – 5000 RPM Spindle Motor: 15hp Turret Capacity: 12 Stations Turret Index Time: 0.15 Second Equipped With Fanuc 21-T series CNC Control Rigid Tapping 8″ 3 Jaw Hydraulic Chuck Tool Presetter Parts Catcher RS-232 Coolant System Foot Switch Turbo Chip Conveyor Extra Steel Chuck Jaws Overall Dimensions: 120" x 77" x 80" Weight: 7600 lbs Machine located in Wisconsin and available for bid with no reserve https://auctions.machinetoolbids.com/Event/LotDetails/3925028/Daewoo-Lynx-200B-CNC-Lathe

Parker Maxigas 112 ECBLM Generator (2010) - 2 MAXIGAS-112 units in parallel - 2 Buffer mixing tanks - 165 scfm compressed air inlet flow at 150 psig - 39.3 scfm 99.9% nitrogen discharge at 130 psig - Digital display of O2 - Economy standby control - Flow verification indicator - 115 volt, single phase power requirement - ½” connection for N2 - 1” connection for inlet compressed air Machine located in North Dakota and available for bid with no reserve https://auctions.machinetoolbids.com/Event/LotDetails/3925794

Jet 1860 3PGH Engine Lathe SWING OVER BED -16" SWING OVER CROSS SLIDE - 8-5/8" SWING THRU GAP - 25-5/8" LENGTH OF GAP - 10-5/8" DISTANCE BETWEEN CENTERS - 60" HOLE THRU SPINDLE - 3-1/8" Machine located in Illinois and available for bid with no reserve https://auctions.machinetoolbids.com/Event/LotDetails/3926051

Excel 610 Colt Vertical Machining Center X-axis travel: 25 in (635 mm) Y-axis travel: 20 in (508 mm) Z-axis travel: 22 in (558 mm) Table surface: 27½ × 17½ in Table load capacity: approx. 1,100 lb (500 kg) Spindle taper: CAT‑ 40 Speed range: 10,000 RPM Spindle motor: 15 HP Tool Changer: 20 ATC Fanuc O‑M Machine located in California and available for bid with no reserve https://auctions.machinetoolbids.com/Event/LotDetails/3926324

Mori-Seiki SV500/40 Vertical Machining Center Control Type MSC-501 # Axis - 3 Table Size - 43.3" x 23.6" Table Capacity - 2,200 pounds X-Axis Travel - 40.2" Y-Axis Travel - 20.1" Z-Axis Travel - 20.1" Rapid Traverse Rate (X/Y/Z) - 1,260 ipm Spindle Taper - CAT 40 Spindle Speed - 10,000 rpm Main Motor - 25 hp Tool Changer Capacity - 30 Equipped With Pallet changer 1 Pallet 40 T Machine located in California and available for bid with no reserve https://auctions.machinetoolbids.com/Event/LotDetails/3926563

Excel 510 Colt Vertical Machining Center Machine Control: Fanuc OMC CNC Table Size: 27.5" x 16.5" Machine Travels (X/Y/Z): 20.1" x 16.2" x 18.1" Table Capacity: 660 Lbs. Spindle Taper: BT 40 Spindle Speeds: 200 - 6,000 RPM Rapid Traverse Rate (X/Y/Z): 710 / 710 / 500 IPM Tool Changer Capacity: 18 Station Power Requirement: 208V, 3 Phase Machine located in California and available for bid with no reserve https://auctions.machinetoolbids.com/Event/LotDetails/3927393

Yaskawa Motoman ERCR-UP20-8800 Welding Cell (2000) Machine comes with welding cell cages and two rotary tables Description 7 Axis Approximately 7' reach Stationary Robot Two turn tables on each side Approximately 10' x 7' max part diameter No welding equipment attached or supplied No Fixtures or tooling Machine is located in Washington and available for bid with no reserve

Nisshinbo MAP-1000 II Turret Punch Max. material thickness: .250" Hole capacity: 3.500" Dia. in 14 Ga. 1.125" Dia. in .250" Punching force: 22 metric tons Mechanical hydraulic wet clutch brake: 24 imperial tons ACCURACY X/Y location: +-.004" Auto-index: +-.05 degrees Axis control simultaneous 4 axis: X, Y, T, C AC servo MAX WORKPIECE SIZE Standard: 49.6" x 39.375" with repositioning: 99.2" x 39.375" with repositioning & sheet rotation: 99.2" x 78.75" Turret drive: Bi-Directional FEED CLEARANCE Thick: .787" Thin: .866" PRODUCTION RATES 1" centers: 220 hpm Nibble: 350 hpm Maximum axis speed: 2000 ipm Auto-index speed: 30 rpm, Bi-Directional Electrical: 230/460/60, 12 KVA Air Requirements: 3.5 SCFM/ .5 CFM at 90 psi Control Type: NISSHINBO PAL-500T Interface: RS-232C standard Multi-tasking: Standard Graphic programming: Standard 14" color monitor Program storage: Floppy disk, 100 programs Memory: 12 programs with 2000 blocks each DIMENSIONS L x W x H: 158.3" x 90.6" x 86.6" Weight: 24,000 lbs Equipped With comes with approximately 400 GPT custom tools, mostly 4-way radius tools Includes Kyoshin Denki Kogyo Model DT-3 Transformer Machine located in North Carolina and available for bid with no reserve

Okuma GP-25T Cylindrical Grinder Control Type OSP700 Swing - 12.99" Center Distance - 25.6" Max Weight Between Centers- 110 ounces Grinding Wheel Dimensions - 24 in x 2.95 in Grinding Wheel Speed RPM - 8,859 rpm Grinding Wheel Spindle Motor - 10 hp Work Head Taper - #4 MT X-Axis Travel - 12.59" Z-Axis Travel - 25.59" Internal Grinding Attachment - no Plunge Machine Dimensions - 113 in x 97.64 in Machine Weight - 12,000 pounds Equipped With Renishaw Touch Probe Mist Collector Machine located in California and available for bid with no reserve https://auctions.machinetoolbids.com/Event/LotDetails/3945124

Heald 273 A ID Grinder Swing over Table: 24.5” Angular adjustment of Workhead: 90 Degrees Workhead Cross Slide Travel: 11 1/2″ Table Travel: 20″ Max. Wheelhead Cross Slide Travel: 1 1/2″ Table Speed Range: 0 to 18 FPM Rapid Traverse of Table: 18 FPM Workhead Speeds from 0 to 500 RPM, Variable Height: 77″ Est. Weight: 7,000 lbs Machine located in California and available for bid with no reserve https://auctions.machinetoolbids.com/Event/LotDetails/3945459

Okuma GA 25T Cylindrical Grinder Angle Head Swing over table: 12.99″ Max grinding dia.: 7.87″ Max workpiece length: 13.78″ Travel range: 25.59″ Auto infeed rate: .000024 to 236 ipm Positioning rate: 630 ipm Work spindle speed: Max. 800 rpm Bore taper: MT-4 Auto travel Manual taper offset:.0031″ Angle Head Equipped With OSP700G CNC Marposs Gauging Machine located in California and available for bid with no reserve https://auctions.machinetoolbids.com/Event/LotDetails/3945753