Charmilles Roboform 44 Sinker EDM (2003) X-Axis: 19'' Y-Axis: 14'' Z-Axis: 20'' C-Rotary Spindle Indexing 360 Degree Work Tank Holding Capacity: 28'' x 42'' x 16'' Machine Located in Georgia

Mori Seiki NH4000 Vertical Machining Center (2006) X-axis Travel: 22" Y-axis Travel: 22" Z-axis Travels: 24.8" Phase 3 60 Hz Voltage: AC 220 V Pallet working surface: 15.7" x 15.7" Pallet loading capacity: 880 lbs Max workpiece swing diameter: 24.8" Spindle Max RPM: 14,000 CAT 40 taper Rapid Traverse Rate: 1968.5 ipm ATC: 60 Max tool length: 15.7" Max Tool mass: 17.6 lbs APC: Number of Pallets: 2 Method of Pallet change: Turn Type Pallet changing time: 6 sec Equipped With Chip Conveyor Coolant Thru Spindle Machine Height: 103" Width x depth: 91" x 155" Weight of Machine: 22,000 lbs Machine Located in Georgia

Haas VF-1 Vertical Machining Center Table Size: 26" x 14" Table Load Capacity: 3,000 lbs. Table Top to Spindle Nose: 4" - 24" X-Axis Travel: 20" Y-Axis Travel: 16" Z-Axis Travel: 20" Spindle Speed: 0 - 7,500 RPM Transmission: 2 Speed Geared Spindle Taper: CAT 40 Spindle Motor: 20 HP Rapid Traverse: 710 IPM Tool Magazine Capacity: 20 Positions Machine Size: 88" x 93" x 105" Machine Weight: 7,100 lbs. Machine Located in Georgia

Star SG-42 CNC Lathe (2011) Main Spindle RPM: 7,000 RPM 2nd Spindle RPM: 5,700 RPM Max Bar Size: 1.65" Max Machining Length: 4" Equipped With 1 tool / station (20mm) 2 tool/station (16mm) 10 Station Turret 100mm Max Part Length 10mm (25/64") Max Drilling Capacity 23mm (29/32") Max Drilling Capacity, 6-Axes: X1, Y2, Z1 (Turret), Z2 (Sub Spindle), C1, C2, 75mm Max Part Projection Length Barfeeder C-Axis Control Chip Conveyor Coolant Tank M12 x P1.75 Max Tapping Capacity M8 x P1.25 Max Tapping Capacity Max 2 / Station, Max 3 / Station Power Drive Attachments Sleeve Holder Machine Located in Georgia

Yama Seiki SW-20 CNC Swiss Lathe (2011) Machining Length: 3.15" Max Cutting Diameter: 3.15" Main Splindle: 10,000 RPM 2nd Spindle: 8,000 RPM Control Type: Fanuc 31i Equipped With Chip Conveyor Iemca Ideal 320 Barfeeder Mist Collector Machine Located in Georgia

Nakamura Tome Super NTY3 Multi Axis Lathe (2006) Bar capacity: 1.7″ Turning length: 23″ Turning diameter: 6.9″ Between centers: 32″ X-axis travel: 5.1″ Z-axis travel (z1-z2/z3): 9.7″/22.8″ B-axis travel: 24.4″ C-axis: Full Y-axis travel: 2.4″ Spindle speed: 6,000 RPM Spindle motor: 15/20 HP Turrets: 3 Number of index positions per turret: 24 Number of driven tools: 12 Hours: 30,541 Equipped With Fanuc 31i-A CNC Control High Pressure Coolant IEMCA Bar Feeder - Model: Boss551/E Machine Located in Georgia

Midwest Metal Werks 4x7x8 Curing Oven (2025) Material: 16GA welded steel OD: 4w x 7h x 8d ID: 40w x 80h x 88d Volts: 208/220/240 Phase: Single or three Amps: 99@208v, 93@220v, 86@240v Circulation fans: 2 @260CFM Latch type: Overhead explosion Door type: Single 4x7 Heating elements: 6 Element covers: Yes Wall thickness: 4-inches Max temp: 500 degrees Controller: WiFi-SYL-2342 Cart: Yes, 2-inch steel Exhaust: 6-inch w/dampener Overhead fork slots: Yes Equipped With 1-year parts and panel warranty Machine Located in Illinois