Hines 300NC Tube Bender (2000) Capacity: Non-Ferrous: 4" OD X .095" Wall Mild Steel: 4" OD X 0.95" Wall Stainless: 3-1/2" x .145 Wall Standard Maximum Radius: 18" Maximum Bending Angle: 190 Degrees Bending Arm Speed: 3.5 RPM Bending Angle Accuracy Plus/- 0.1 Degree Power Requirements: 220/3/60, 440/3/60 Equipped With Dual Stage Pump Hydraulic System (Rebuilt in 2022) Pressure Die Assist Pressure Die Holder Wiper Die Holder Mandrel Lubricator Tube Piece Counter Foot Pedal Control Tooling Included All Manuals Available

Trumpf TruLaser 1030 Laser Cutting Machine (2014) Table Width: 5' Table Length: 10' Max Wattage: 2,000 X-Axis Travel: 120" Y-Axis Travel: 60" Z-Axis Travel: 4.5" Control: Trumpf CNC Approx. Overall Dimensions 368" x 236" x 91" Approx. Weight 20,950 Lbs

Minster 60T OBI Press Tonnage: 60 Stroke: 4" Ram Adjustment: 3.5" Shut Height: 13.5" Bed Size: 21" x 32" Speed: 90 SPM Air Pressure: 55 PSI Max. Adjustment of Slide: 3-1/2" Electric Power: Volts 240 / Phase 3 / Cycle 60 Clutch Control Voltage: Volts 110 / Phase 1 / Cycle 60 DIMENSIONS: 75" L x 60" W x 120" H Weight: 14,000 lbs

Python X Robotic Plasma Cutting System (2008) BEAM WIDTH, MINIMUM 4" BEAM WIDTH, MAXIMUM 36" CHANNEL WIDTH, MINIMUM 3" CHANNEL WIDTH, MAXIMUM 36" HSS TUBE, MINIMUM 2" X 2" HSS TUBE, MAXIMUM 24" X 16" ANGLES, MINIMUM 3" X 3" ANGLES, MAXIMUM 8" X 8" STRIP WIDTH, MINIMUM 4" STRIP WIDTH, MAXIMUM 36" STRIP THICKNESS, MINIMUM .25" STRIP THICKNESS, MAXIMUM 1.25" BEAM LENGTH, MAXIMUM 480" Equipped With PYTHON CNC CONTROL ABB ROBOT FOR 3-SIDE PROCESSING HPR260 PLASMA SYSTEM 65ft INFEED CONVEYOR 45ft OUTFEED CONVEYOR

Simec MEC 120 CNC Tube Saw (2019) Round Tube: from 10mm to 100mm (0.394" - 3.94") Square Tube: from 10 x 10mm to 90 x 90mm (0.394" x 0.394" to 3.54" x 3.54") Rectangular: from 10 x 10mm to 120 x 80mm (0.394" x 0.394" to 4.7" x 3.15") Bar: from 10mm to 40mm (0.394" - 1.58") Minimum cut length: 10mm (0.394") Maximum cut length: up to 3000mm (up to 118") Cutting tolerance: +/- 0.2mm (0.008") Angle cut: +/-60° Blade diameter: from Ø250mm to Ø350mm (9.84" - 13.78") Cutting speed: from 30rpm to 3000rpm, depending on the material Feeding speed of the gripper: 1.5m/s (4.9 ft/sec) Blade motor: 2.25/ 3kw (or 4kw with inverter) Cutting plane height: 900mm (35.4") Maximum vice opening: 130mm (5.12") Equipped With -Straight or angle cut of tubes from minimum ø 10mm to max ø 100mm (0.394" - 3.94") - Step by step feeding of the gripper: stroke 2000mm (78.74") through ball screw and Motor Brushless - Automatic positioning of the feeding gripper length - Quick release vice jaws for rapid tooling changes - Double clamping vices, on both sides of the saw blade - Hydraulic clamping vice and gripper - Vertical cutting descending from above saw head mounted on prismatic guides tempered and ground - Discharge systems with unloader cylinder plus deflector Auto Feed CNC Control Tooling Exit System Less than 1000 hours total of usage

OS Varnsdorf W9 TOS Horizontal Boring Mill Min motor - 1455 rpm X travel - 39.4/49.2 inch Z Travel - 31.5/55.1 inch Y Travel - 35.4/44.1 inch W Travel - 28 inch Work spindle diameter - 3.5 inch Clamping Taper - 40 ISO Equipped With 4 linear axes Fixed Column, crosswise traveling table Sliding work spindle Rotary table Facing head with tool slide

Accurpress 732016 Press Brake (2001) Tonnage: 320 Length: 16' 2 Axis 575 V Distance between housings 170” Length of the bottom Die 192” Throat Depth: 10.125” Equipped With ETS 3000 Control Brand New Control installed in 2022 Manual Crowning

Trumpf TruBend 5130 Press Brake (2011) Control: TASC 6000 Connection values Connected load: 27 kVA Oil capacity: 58 gal. 6 Axis Control and Backgauge Crowning Hydraulic Clamps Wila Dimensions and weight: Length x Width: 160 x 69 in. Height: 112 in. Weight: 24,030 lbs.

Haas VF-8/50 Vertical Machining Center (2005) X-Axis Travel: 64" Y-Axis Travel: 40" Z-Axis Travel: 30" Rapid Rate X Axis: 540 IPM Rapid Rate Y Axis: 600 IPM Rapid Rate Z Axis: 600 IPM Max Table Load: 4,000 lbs Spindle Motor: 30 HP Spindle Speed: 10,000 RPM Spindle Taper: 50 CT Tool Changer: 24 ATC Table Size: 64" x 36" Equipped With **Needs VFD Drive** SMTC50 Gear Box Chip Conveyor, Auger Style Programmable Coolant Nozzle Expanded Memory to 1 MB Visual Quick Code Programming System Remote Jog Handle High-Intensity Lighting Through spindle coolant, 300 PSI Auxiliary Coolant Filter System Servo Rotary Table Dimensions: 193" x 120" x 132" Weight: 29,000 lbs

FICEP 1101 DZB Beam Line (2006) Max Beam Width: 3’-3”, Max Beam Length: 65’-0” Max Beam Height: 2’-0” Max Cut Angle: 45 Current Operating Hours: 70,000 Hours Equipped With Middle Conveyor multi axis drill / beam line

Colgar 80T Press Brake Tonnage: 80 Length: 120"